Each recommendation below separates complete battery-included kits from bare-tool add-ons and platform-neutral garage staples so the configuration matches the recipient's setup.
#1 · Starter Combo Kit
DeWalt DCK240C2 20V MAX Drill & Impact Driver Kit
Best for: First cordless kit or replacing an old NiCad drill
In the box: Complete kit: DCD771 drill, DCF885 impact driver, two 1.3Ah batteries, charger, and bag.
For a dad starting fresh or upgrading from a corded drill, a two-tool kit eliminates battery-matching guesswork. The DCK240C2 pairs a compact 1/2-inch drill/driver with a dedicated 1/4-inch hex impact driver so driving deck screws no longer requires swapping bits every two minutes.
Watch out: These are compact brushed motors with entry 1.3Ah packs. If he already owns DeWalt 20V MAX XR batteries, buy a brushless bare tool instead of repeating starter packs.
#2 · Pro-Grade Combo Kit
Milwaukee 2997-22 M18 FUEL Hammer Drill & Impact Driver Kit
Best for: Heavy DIY, framing, masonry anchors, and frequent workshop use
In the box: Complete kit: M18 FUEL hammer drill, M18 FUEL impact driver, two 5.0Ah REDLITHIUM batteries, charger, and hard case.
When the recipient tackles serious structural work, garage builds, or thick lag bolts, Milwaukee's M18 FUEL kit steps up to brushless motors and 5.0Ah packs. You get sustained torque under load and full access to the M18 battery ecosystem for future bare-tool gifts.
Watch out: The 5.0Ah batteries add noticeable weight overhead compared to compact 12V kits. Only choose this tier when high output matters more than pocket-sized ergonomics.
#3 · DeWalt Bare-Tool Upgrade
DeWalt DCF850B 20V MAX ATOMIC Impact Driver (Bare Tool)
Best for: Dads who already have DeWalt 20V MAX batteries on the bench
In the box: Bare tool only: battery and charger sold separately.
At just 3.97 inches front to back, the DCF850B reaches between tight cabinet frames, engine bays, and wall studs where a standard impact driver hits the opposite wall. It still delivers up to 1,825 in-lbs of max torque and includes a 3-speed selector for small hinge screws.
Watch out: Verify he has yellow 20V MAX packs before ordering. Without an existing battery and charger, a bare tool sits unused until another pack arrives.
#4 · Ryobi Bare-Tool Upgrade
Ryobi PBLID02B ONE+ HP 18V 4-Mode Impact Driver (Bare Tool)
Best for: Homeowners invested in lime-green Ryobi 18V ONE+ batteries
In the box: Bare tool only: battery and charger sold separately.
Many homeowners keep Ryobi ONE+ tools around the garage because the battery shape has stayed backward-compatible for years. Upgrading an older brushed Ryobi driver to the brushless PBLID02B adds four fastening modes and smoother trigger control without forcing a brand switch.
Watch out: Do not gift a Ryobi bare tool unless you see lime-green 18V ONE+ packs in the garage, as older batteries need to be lithium-ion for full brushless performance.
#5 · Platform-Free Garage Gift
DeWalt DWMT75049 192-Piece Mechanics Tool Set
Best for: Any car owner, mower tinkerer, or homeowner regardless of drill brand
In the box: Complete 192-piece SAE and metric 1/4-inch, 3/8-inch, and 1/2-inch drive set in a molded case.
When you cannot verify battery voltage or brand in the shed, a three-drive mechanics socket set avoids every compatibility trap. The DWMT75049 covers SAE and metric fasteners with 72-tooth pear-head ratchets and knurled beauty rings for spinning loose bolts by hand.
Watch out: The hard plastic blow-molded case is durable for trunk storage, though deep-drawer rolling tool chest owners often transfer the sockets onto metal rails.
#6 · Runtime Upgrade Gift
Milwaukee 48-11-2450 M12 REDLITHIUM High Output XC 5.0Ah Battery
Best for: Milwaukee M12 owners whose compact tools drain 2.0Ah packs too quickly
In the box: Single 12V 5.0Ah battery pack (requires M12 charger).
Extra batteries are rarely bought impulsively, yet they make every existing cordless tool more pleasant to use. For dads running Milwaukee M12 stubby impact wrenches, ratchets, or oscillating tools, the High Output XC 5.0Ah pack provides longer runtime and cooler operation with resistant housing.
Watch out: Check the charger voltage first: M12 slide/stem packs only fit Milwaukee 12V M12 tools and chargers, not 18V M18 tools.