Current recommendations are research-backed. Each article identifies its evidence, sources, update date, and limitations. No current guide is presented as hands-on tested. As an Amazon Associate, ToolShed Tested earns from qualifying purchases. When you buy through our links we may earn a commission, at no extra cost to you. Product links and article details last reviewed November 11, 2026. Full disclosure.
Our Picks, Reviewed
SPEC SHEET // #01 -- Best Heavy-Duty PickREF: B0BB854SJ8
Best for
Best Heavy-Duty Torque in a Compact Length
Package
2904-20 bare tool, side handle, and belt clip (M18 battery and charger sold separately)
Milwaukee's single flagship M18 hammer drill delivers big-drill torque and AUTOSTOP bind protection inside a compact 6.9-inch footprint.
Key features
- POWERSTATE brushless motor rated at 1,400 in-lbs peak torque with 0-500 / 0-2,100 RPM and 0-33,000 BPM
- 6.9-inch front-to-back head length with 1/2-inch all-metal ratcheting chuck and carbide grip teeth
- AUTOSTOP electronic kickback control plus included auxiliary side handle for high-torque hole saws
✓ What Stands Out (Pros)
- Full-size flagship drilling torque compressed into a 6.9-inch chassis that still fits standard stud bays
- AUTOSTOP anti-rotation feature shuts down the motor quickly if a hole saw or auger bit binds
- Includes a rigid side handle in the box because it is engineered for heavy boring loads
✕ Watch Out For (Cons)
- Heavier bare-tool mass at 3.3 pounds before snapping on an M18 XC5.0 battery
- Base-mounted foot LED does not pivot like DeWalt's 3-position spotlight worklight
Who it's for: Plumbers, electricians, remodelers, and M18 owners who drill large self-feed bits, hole saws in sheet metal, and masonry anchors with one primary drill.
SPEC SHEET // #02 -- Best Compact HandlingREF: B09YXQHR8M
Best for
Best Lightweight Ergonomics & Worklight
Package
DCD805B bare tool and belt hook (20V MAX battery and charger sold separately)
A nimble, well-balanced mid-weight XR hammer drill that shines on daily framing, fasteners, Tapcons, and dark cabinet or attic work.
Key features
- 2-speed 20V MAX XR brushless transmission rated at 0-650 / 0-2,000 RPM and up to 34,000 BPM
- 7.0-inch head length and trim 2.95-pound bare-tool weight
- 3-position pivoting 70-lumen LED with 20-minute spotlight shutoff mode
✓ What Stands Out (Pros)
- Roughly a third of a pound lighter bare than Milwaukee 2904-20, reducing arm fatigue overhead and on ladders
- Higher Speed 1 ceiling (650 RPM vs 500 RPM) feels brisk for mid-size spade bits and pilot holes
- 3-position pivoting LED aims light straight past long bits and doubles as a 20-minute cabinet lantern
✕ Watch Out For (Cons)
- Mid-size XR torque tier sits below heavy-duty 3-speed hammer drills on 4-inch+ hole saws; comes without a side handle
- Lacks dedicated anti-kickback shutoff on the standard DCD805B (DeWalt reserves anti-rotation for select newer SKUs)
Who it's for: DeWalt 20V MAX owners, service technicians, and remodelers who want fast masonry Tapcon capability and top-tier work lighting without hauling a 3.5-pound three-speed brick.
SPEC SHEET // #03 -- Heavy-Duty DeWalt PickREF: B08J8JK9GW
Best for
Best Heavy-Duty 3-Speed DeWalt Alternative
Package
DCD999B bare tool, 360-degree side handle, and belt hook (20V MAX or FLEXVOLT battery sold separately)
If you are on DeWalt batteries and need 2904-20 heavy-hole-saw authority rather than DCD805B agility, step up to DCD999B.
Key features
- Full-size 3-speed metal transmission reaching 2,250 RPM and 38,250 BPM in hammer mode
- FLEXVOLT Advantage electronics unlock higher power output when paired with a 60V MAX FLEXVOLT pack
- Includes 360-degree auxiliary side handle and nitro-carburized 1/2-inch metal ratcheting chuck
✓ What Stands Out (Pros)
- True heavy-duty DeWalt class match against Milwaukee 2904-20 for large hole saws, augers, and mud mixing
- Dedicated 3-speed gearbox adds a middle torque/speed gear plus 38,250 BPM masonry percussion
- Runs every standard 20V MAX battery and steps up output automatically on FLEXVOLT packs
✕ Watch Out For (Cons)
- Substantially longer (8.4 inches) and heavier (3.54 pounds bare) than both DCD805B and 2904-20
- Too long for cramped 12-inch cabinet bays or tight floor-joist pockets
Who it's for: Existing DeWalt 20V MAX and FLEXVOLT users whose primary jobs involve heavy timber boring, large hole saws, and frequent brick or block drilling.
SPEC SHEET // #04 -- Compact Non-Hammer PickREF: B09ZQ4VTXK
Best for
Best Non-Hammer Wood & Metal Alternative
Package
DCD800B bare tool and belt hook (non-hammer configuration; 20V MAX battery sold separately)
Skip paying for extra length and weight on DCD805B if you never drill concrete or brick; DCD800B is shorter, lighter, and cleaner for wood and steel.
Key features
- Non-hammer twin of DCD805B with an even shorter 6.37-inch head length
- 2.82-pound bare weight with identical 0-650 / 0-2,000 RPM 2-speed XR brushless drivetrain
- Includes the same 3-position pivoting 70-lumen LED spotlight
✓ What Stands Out (Pros)
- Shaves over 0.6 inches of length off DCD805B by omitting the percussion hammer ring
- Eliminates accidental slipping into hammer mode when adjusting clutch settings on cabinetry
- Lightest bare weight in this comparison at 2.82 pounds
✕ Watch Out For (Cons)
- Zero percussion hammer mode for brick, mortar, stucco, or concrete Tapcon anchors
- Battery and charger sold separately
Who it's for: Woodworkers, cabinetmakers, metal fabricators, and homeowners with wood-stud walls who never drill masonry (or already own an SDS rotary hammer).
Shoppers cross-shop the DeWalt DCD805 and Milwaukee 2904-20 constantly because both sit at roughly 7 inches from chuck tip to back cap, wear their brands' pro brushless badges (20V MAX XR and M18 FUEL), and carry 1/2-inch metal ratcheting chucks with masonry hammer modes. Underneath that visual similarity sits an important product-line split that most quick spec blurbs miss: Milwaukee 2904-20 is Milwaukee's full-power flagship M18 hammer drill shrunk into a 6.9-inch housing, whereas DeWalt DCD805 is DeWalt's mid-size compact XR hammer drill positioned beneath its larger three-speed heavy-duty hammer drills (such as DCD999B).
Understanding that class split makes choosing between them straightforward. Below, we compare published manufacturer specifications for torque and power ratings, gearbox speeds, masonry blow rates, wrist-saving kickback protection, LED lighting, and bare weights across Milwaukee 2904-20, DeWalt DCD805B, DeWalt's heavy-duty DCD999B, and DeWalt's non-hammer DCD800B. Because Amazon bare-tool and kit prices fluctuate daily, we never print static prices; use the live product links to verify current pricing and seller stock. This guide is a research-based specification comparison rather than a physical bench evaluation.
Published Spec Matrix: Milwaukee 2904-20 vs DeWalt DCD805B (Plus DeWalt Siblings)
Notice how DeWalt and Milwaukee publish power differently: Milwaukee quotes peak torque in inch-pounds (in-lbs), while DeWalt quotes Unit Watts Out (UWO) or percentage gains over prior XR models because UWO captures torque multiplied by rotational speed under load.
1. Heavy Hole-Saw Torque and Anti-Kickback Safety
If you regularly chuck up a 3-inch to 6-inch bi-metal hole saw for recessed lighting cans, dryer vents, or plumbing penetrations, or drive 7/8-inch ship augers through doubled top plates, Milwaukee 2904-20 plays in a heavier league than DCD805B. Two factory decisions prove it immediately: first, Milwaukee includes a clamp-on metal/molded auxiliary side handle in the 2904-20 bare-tool box so you can brace two hands against reaction torque. Second, 2904-20 integrates AUTOSTOP gyroscopic anti-kickback electronics (with a dedicated indicator light on the foot) that cut motor power within a small fraction of a rotation when a bit snags on a hidden nail or breaks through sheet steel.
DeWalt's DCD805B omits a side handle collar and does not include electronic anti-rotation shutoff on the standard DCD805B SKU. Its 2-speed XR brushless motor has plenty of punch for 1-inch spade bits, step drills in electrical panels, pocket screws, and ledger fasteners, and its higher Speed 1 ceiling (650 RPM vs 500 RPM on the Milwaukee) actually feels snappier on medium wood boring. However, if you are on DeWalt 20V MAX batteries and routinely run big self-feed plumbers' bits on a ladder where bit bind is a real wrist hazard, either step up to DeWalt's heavy-duty 3-speed DCD999B (with 360-degree side handle) or confirm whether you are looking at DeWalt's newer full-size anti-rotation XR tier.
2. Head Length, Balance, and Overhead Weight
Milwaukee pulled off impressive packaging engineering on Gen 4: squeezing a 1,400 in-lb motor and hammer mechanism into a 6.9-inch head makes 2904-20 fractionally shorter than DeWalt's mid-size 7.0-inch DCD805B, and a full 1.5 inches shorter than DeWalt's 8.4-inch DCD999B. Both 2904-20 and DCD805B slip comfortably between standard 14.5-inch joist bays even with a stubby twist bit installed.
Where DeWalt wins back points every hour of the workday is mass and grip circumference. At 2.95 pounds bare, DCD805B weighs roughly 5.6 ounces less than the 3.30-pound 2904-20 before batteries even enter the equation. Snap a compact DeWalt 1.7Ah POWERSTACK or 2.0Ah XR battery onto DCD805B and you get an agile, front-neutral service drill for overhead conduit straps, soffits, and cabinet installation. Snap an M18 XC5.0 pack onto 2904-20 and total tool weight climbs near five pounds: rock-solid when leaning into brick mortar, tiring when reaching above shoulder height all afternoon.
3. Masonry Hammer Mode Reality Check (Tapcons vs Rotary Hammers)
Both drills spin an axial mechanical cam ratchet in hammer mode: DeWalt DCD805B delivers up to 34,000 BPM at 2,000 RPM, while Milwaukee 2904-20 delivers up to 33,000 BPM at 2,100 RPM. For 3/16-inch and 1/4-inch Tapcon concrete screws in basement block, brick veneer hose reels, exterior electrical boxes, and stucco ledger brackets, both drills punch clean holes quickly when paired with fresh carbide masonry bits (see our drill bit buying guide and concrete drilling guide).
Be realistic about mechanical cam hammer limits, though: neither DCD805B nor 2904-20 replaces an SDS-Plus rotary hammer if you need to sink twenty 1/2-inch wedge anchors into cured 4,000-PSI slab concrete. Conversely, if you live in a wood-framed house and already own a rotary hammer (or never touch brick), consider DeWalt's DCD800B: it strips out the hammer cam to drop head length to 6.37 inches and bare weight to 2.82 pounds.
4. Worklight Design: DeWalt's 3-Position Pivot Wins
Lighting sounds minor on a spec sheet until you are drilling inside a dark vanity sink base or attic truss bay. Milwaukee mounts a fixed LED on the foot of 2904-20 angled upward toward the chuck; it illuminates the bit tip adequately at medium distances, though the wide all-metal chuck casts a shadow at close range. DeWalt outfits both DCD805B and DCD800B with a 3-position pivoting 70-lumen LED on the foot featuring low, medium, and a 20-minute high-output spotlight mode. Tilting the bezel aims light straight onto your layout mark and turns the drill standing on its battery into a hands-free utility lantern.
Model numbers ending in -20 on Milwaukee (`2904-20`) and B on DeWalt (`DCD805B`, `DCD999B`, `DCD800B`) designate bare tools sold without batteries or chargers. Follow two simple buying rules:
- Already own M18 or DeWalt 20V MAX batteries? Buy the bare tool matching your existing charger. Switching battery lines for a quarter-inch of length or 100 RPM makes zero financial sense once you factor in two batteries and a charger.
- Starting from zero batteries (or buying a gift)? Never buy a bare `-20` or `B` SKU alone. Both drills cost far less per piece inside their flagship two-tool combo kits: Milwaukee bundles 2904-20 with the 2953-20 impact driver and two 5.0Ah packs in 3697-22, while DeWalt bundles DCD805 with the DCF850 impact driver and two 4.0Ah packs in DCK2050M2. Compare both kits directly in our Milwaukee M18 FUEL vs DeWalt 20V MAX XR combo kit guide, or explore broader options in cordless drills 2026 and our 3-question Drill Finder.
Timing an upgrade around November? Bare-tool drills like 2904-20, DCD805B, and DCD800B are prime candidates during Cyber Monday tool deals, while full battery kits lead Black Friday power tool deals and our Christmas tool gifts 2026 hub.
Frequently Asked Questions
Which drill has more torque, DeWalt DCD805 or Milwaukee 2904-20?
Milwaukee 2904-20 sits in a higher heavy-duty torque class (rated at 1,400 in-lbs peak torque with an included side handle and AUTOSTOP anti-kickback shutoff). DeWalt DCD805 is a mid-size compact XR hammer drill built for lighter 2.95-pound handling; DeWalt's direct heavy-duty torque counterpart to 2904-20 is its larger three-speed XR/FLEXVOLT Advantage hammer drill tier such as DCD999B.
What is the difference between DeWalt DCD805B and DeWalt DCD800B?
DCD805B adds an axial percussion hammer mode (up to 34,000 BPM) for drilling into brick, block, mortar, and light concrete, resulting in a 7.0-inch head and 2.95-pound bare weight. DCD800B uses the same 2-speed XR brushless motor without the hammer mechanism, trimming head length to 6.37 inches and bare weight to 2.82 pounds for wood, drywall, plastic, and metal.
Does Milwaukee 2904-20 work with older Milwaukee M18 batteries?
Yes. Every Milwaukee M18 slide battery fits 2904-20, including compact CP2.0 packs, standard XC5.0 packs, and newer HIGH OUTPUT or FORGE packs. Higher-discharge packs allow the POWERSTATE motor to sustain peak torque longer under heavy hole-saw or auger loads.
Does DeWalt DCD805B work with DeWalt POWERSTACK and 60V FLEXVOLT batteries?
Yes. DCD805B accepts all DeWalt 20V MAX slide batteries, including compact 1.7Ah and 5.0Ah POWERSTACK pouch-cell packs, standard XR cylindrical-cell packs, and dual-voltage 20V/60V MAX FLEXVOLT packs (which automatically step down to 20V MAX when slid onto a 20V tool).
Do bare-tool listings for DCD805B and 2904-20 include drill bits or batteries?
No. Bare-tool SKUs (DCD805B and 2904-20) ship with the tool body and belt hook (plus the side handle on 2904-20), with zero batteries, chargers, or drill bits in the carton.
Sources