Current recommendations are research-backed. Each article identifies its evidence, sources, update date, and limitations. No current guide is presented as hands-on tested. As an Amazon Associate, ToolShed Tested earns from qualifying purchases. When you buy through our links we may earn a commission, at no extra cost to you. Product links and article details last reviewed November 11, 2026. Full disclosure.
Our Picks, Reviewed
SPEC SHEET // #01 -- Best 2-Tool Pro KitREF: B0BB8FDVLQ
Best for
Best Heavy-Duty 2-Tool Pro Kit
Package
2904-20 M18 FUEL hammer drill, 2953-20 M18 FUEL impact driver, two M18 REDLITHIUM XC5.0 (5.0Ah) batteries, M18/M12 multi-voltage charger, and hard case
The benchmark two-tool brushless kit when maximum torque, AUTOSTOP kickback protection, and full 5.0Ah batteries matter most.
Key features
- Pairs flagship Gen 4 2904-20 hammer drill (1,400 in-lbs) with 2953-20 4-mode impact driver (2,000 in-lbs)
- Includes two full-capacity 5.0Ah REDLITHIUM XC5.0 packs (180Wh combined energy)
- M18 and M12 dual-voltage charger plus molded blow-molded carrying case
✓ What Stands Out (Pros)
- Zero filler tools: both serialized tools are Milwaukee's top-tier brushless M18 FUEL flagships
- Two 5.0Ah batteries deliver 25% more nominal amp-hour capacity than 4.0Ah two-tool kits
- Dual M18/M12 charger lets you add compact 12V M12 service tools later without buying a second charger
✕ Watch Out For (Cons)
- Includes no circular saw, reciprocating saw, or work light in the base box
- 3.3-pound bare hammer drill plus 5.0Ah pack feels heavier overhead than DeWalt's compact XR/ATOMIC pairing
Who it's for: Tradespeople and serious remodelers who want uncompromising drilling and fastening torque plus two 5.0Ah batteries ready to run future bare-tool saws.
SPEC SHEET // #02 -- Best Compact 2-Tool Kit
Best for
Best Compact-Handling 2-Tool XR Kit
Package
DCD805 1/2-inch XR hammer drill, DCF850 ATOMIC 1/4-inch impact driver, two DCB204 4.0Ah batteries, charger, and contractor bag
DeWalt's smartest everyday two-tool pairing for tight framing bays, combining XR hammer-drill speed with the stubby DCF850 impact driver.
Key features
- Combines compact 7.0-inch DCD805 XR hammer drill with ultra-short 3.97-inch DCF850 ATOMIC impact driver
- Includes two DCB204 20V MAX 4.0Ah lithium-ion batteries and charger
- Pivoting 3-position 70-lumen LED on the hammer drill plus 3-LED halo ring on the impact driver
✓ What Stands Out (Pros)
- DCF850 impact driver's sub-4-inch head slips between 16-on-center studs, cabinet boxes, and HVAC ductwork effortlessly
- Lighter tool bodies reduce wrist strain during all-day ladder, electrical, and finish carpentry work
- 4.0Ah batteries still provide ample runtime if you add a bare-tool circular saw or multi-tool next
✕ Watch Out For (Cons)
- DCD805 is a mid-size 2-speed XR hammer drill rather than DeWalt's largest 3-speed heavy-hole-saw drill
- Ships with a soft contractor bag and 4.0Ah packs rather than 5.0Ah batteries and a hard case
Who it's for: Electricians, cabinet installers, residential remodelers, and DeWalt buyers who value tight-space clearance and lower carry weight over brute auger torque.
SPEC SHEET // #03 -- Best M18 5-Tool KitREF: B0C6BQG3PN
Best for
Best All-Brushless FUEL 5-Tool Kit
Package
2904-20 hammer drill, 2953-20 impact driver, 2821-20 SAWZALL, 2730-20 6-1/2-inch circular saw, 2735-20 LED light, two XC5.0 batteries, M18/M12 charger, and contractor bag
An uncompromising four-motor M18 FUEL core bundle plus work light, held back only if you insist on a 7-1/4-inch blade circular saw.
Key features
- Every motorized tool is full M18 FUEL brushless: 2904-20 drill, 2953-20 impact, 2821-20 Gen 2 SAWZALL, and 2730-20 circular saw
- Includes two M18 REDLITHIUM XC5.0 (5.0Ah) packs and multi-voltage M18/M12 charger
- Full-size 1-1/4-inch stroke 2821-20 SAWZALL handles heavy nail-embedded demolition
✓ What Stands Out (Pros)
- No downgraded brushed tools hidden inside the bundle; all four cutting and fastening tools carry POWERSTATE brushless motors
- 2821-20 SAWZALL is a true two-handed demolition workhorse rather than a light compact recip saw
- Left-blade 6-1/2-inch 2730-20 circular saw gives right-handed users direct cut-line sightlines
✕ Watch Out For (Cons)
- Bundles a 6-1/2-inch circular saw (2730-20) rather than a 7-1/4-inch framing saw
- Sharing two 5.0Ah batteries across two high-draw saws makes adding a third High Output pack advisable for crew work
Who it's for: Remodelers, plumbers, and general contractors investing in M18 FUEL from scratch who want flagship drilling and heavy SAWZALL demolition in one purchase.
SPEC SHEET // #04 -- Best Framing 5-Tool Kit
Best for
Best 5-Tool Kit With 7-1/4-Inch Circular Saw
Package
DCD996 3-speed hammer drill, DCF887 3-speed impact driver, DCS570 7-1/4-inch circular saw, DCS367 compact reciprocating saw, DCL040 LED light, two DCB205 5.0Ah batteries, DCB115 charger, and bag
The better 5-tool pro choice when a full 7-1/4-inch circular saw and compact between-the-studs recip saw fit your carpentry workflow.
Key features
- Includes full-size 7-1/4-inch brushless circular saw (DCS570) and 3-speed DCD996 XR hammer drill
- Compact 4-position blade clamp DCS367 brushless reciprocating saw fits between 16-inch studs
- Two DCB205 20V MAX XR 5.0Ah batteries and DCB115 charger included
✓ What Stands Out (Pros)
- DCS570 uses standard 7-1/4-inch framing blades with deeper bevel cut capacity than 6-1/2-inch kit saws
- DCS367 center-motor reciprocating saw fits inside stud bays and under sinks where full-length saws cannot
- 3-speed DCD996 hammer drill provides a dedicated middle gear for hole saws and masonry bits
✕ Watch Out For (Cons)
- DCD996 and DCF887 are proven prior-generation XR flagships rather than the newer, shorter DCD805 and DCF850
- Confirm exact sub-model tool list on marketplace listings before checkout so older batch variants do not surprise you
Who it's for: Deck builders, framers, and general remodelers who want standard 7-1/4-inch circular saw blades and a stud-bay-friendly reciprocating saw alongside two 5.0Ah packs.
SPEC SHEET // #05 -- Best 7-Tool CoverageREF: B0CHR1TSCT
Best for
Best Broad-Coverage Multi-Tool Brushless Bundle
Package
DCD794 drill, DCF809 impact driver, DCS565 6-1/2-inch circular saw, DCS369 one-handed recip saw, DCS354 oscillating multi-tool, DCW210 5-inch orbital sander, DCL040 light, one 5.0Ah battery, one 2.0Ah battery, charger, and bag
The highest-utility multi-tool DeWalt bundle when an oscillating multi-tool and orbital sander will see more action than a masonry hammer drill.
Key features
- Seven brushless tools adding both DCS354 oscillating multi-tool and DCW210 5-inch orbital sander to the core saws and drivers
- Pairs one 5.0Ah XR battery for saws and sanding with one lightweight 2.0Ah pack for compact drilling
- DCD794 compact drill is non-hammer; ideal for wood, drywall, trim, and cabinetry
✓ What Stands Out (Pros)
- Includes the two remodeling tools missing from 5-tool kits: an oscillating multi-tool and random orbital sander
- All six motorized tools use brushless motors rather than budget brushed closeouts
- Smart mixed battery pairing gives you both light overhead handling (2.0Ah) and saw runtime (5.0Ah)
✕ Watch Out For (Cons)
- Includes compact DCD794 drill/driver without hammer-drill masonry mode
- Only one 5.0Ah pack in the box, so heavy continuous sawing benefits from a spare battery
Who it's for: Punch-list remodelers, woodworkers, and property owners who want brushless cutting, flush-trimming, and sanding tools right out of the box.
Combo kit headlines are engineered to confuse shoppers. Retailers routinely place a brushed six-tool holiday special with tiny 1.5Ah batteries right next to a flagship brushless two-tool kit carrying two 5.0Ah packs, making the larger pile of plastic look like the smarter bargain. Once you step up to genuine pro-grade lines, specifically Milwaukee M18 FUEL and DeWalt 20V MAX XR, the marketing fluff disappears and exact sub-model numbers decide everything: drill head length, impact-driver speed modes, circular saw blade diameter, reciprocating saw stroke architecture, and total watt-hours of lithium-ion storage in the bag.
This comparison audits the published manufacturer package contents for the core 2-tool and 5-tool pro kits from Milwaukee (3697-22 and 3697-25) and DeWalt (DCK2050M2 and DCK594P2), plus DeWalt's 7-tool brushless remodeling kit (DCK700D1P1) for buyers weighing tool variety against individual tool tier. Because bundle pricing and bonus-battery offers move daily, we do not print static prices; each link routes to Amazon so you can inspect live pricing and delivery windows. All findings below are specification and configuration comparisons rather than physical workshop evaluations.
Side-by-Side Sub-Model Matrix: M18 FUEL vs DeWalt 20V MAX XR Kits
Never evaluate a combo kit without listing the exact bare-tool SKU of every machine inside the carton. Notice how DeWalt and Milwaukee make opposite choices on drill size, circular saw diameter, and reciprocating saw geometry.
A brushless two-tool kit is the cleanest entry point into a pro battery platform because zero budget goes toward an underpowered work light or a saw size you did not pick yourself. Yet Milwaukee 3697-22 and DeWalt DCK2050M2 are built around noticeably different weight classes.
Torque and Heavy Boring vs Compact Framing Agility
Milwaukee 3697-22 bundles the full-power Gen 4 2904-20 M18 FUEL 1/2-inch hammer drill (rated at 1,400 in-lbs peak torque with mechanical/electronic AUTOSTOP anti-kickback control) alongside the Gen 4 2953-20 impact driver (2,000 in-lbs max fastening torque, 0 to 3,900 RPM, Tri-LED collet ring, and four drive modes). If you run 4-inch hole saws through rim joists, auger bits through wet pressure-treated posts, or ledger lags into framing, 3697-22 brings true heavy-duty muscle in a remarkably short 6.9-inch drill head. For a deep spec breakdown on the two drills alone, read our DeWalt DCD805 vs Milwaukee 2904-20 hammer drill comparison.
DeWalt DCK2050M2 deliberately steps down half a weight class for speed and tight access. It pairs the 7.0-inch, 2.95-pound DCD805 2-speed XR hammer drill with the stubby 3.97-inch DCF850 ATOMIC 3-speed impact driver (1,825 in-lbs max torque). While DCD805 gives up top-end hole-saw headroom to Milwaukee's 2904-20, the DCF850 impact driver is shorter front-to-back than Milwaukee's 2953-20 (4.47 inches), allowing right-angle screw driving inside 12-inch cabinet boxes, electrical panels, and HVAC plenums without an angled adapter.
Battery Capacity and Charger Value
Remember that 18V nominal and 20V MAX are identical five-cell lithium-ion chemistry (explained in full in our 18V vs 20V MAX voltage guide). Multiply 18 nominal volts by amp-hours to compare true stored watt-hours:
- Milwaukee 3697-22: Two 5.0Ah packs = 180 watt-hours total (90Wh per battery), plus a dual M18/M12 charger and a hard plastic case.
- DeWalt DCK2050M2: Two 4.0Ah packs = 144 watt-hours total (72Wh per battery), plus a 20V MAX charger and a soft contractor bag. (Note: if you spot older stock of Milwaukee's prior-generation 2997-22 M18 FUEL kit on clearance, check its price against 3697-22 so you know whether you are getting Gen 3 or Gen 4 tools.)
Stepping from two tools to five adds a circular saw, a reciprocating saw, and an LED work light while keeping two 5.0Ah batteries in both boxes. Here, the saw pairing should dictate your decision more than brand loyalty.
Circular Saw Blade Size: 6-1/2-Inch Blade-Left vs 7-1/4-Inch Blade-Right
Milwaukee 3697-25 includes the 2730-20 M18 FUEL 6-1/2-inch circular saw. Its blade sits on the left side of the motor, giving right-handed carpenters an unobstructed view of the pencil line when crosscutting 2x4s, 2x6s, OSB subflooring, and plywood. However, 6-1/2-inch blades top out around 2-3/16 inches of cut depth at 90 degrees and use a less universal blade size than standard framing saws.
DeWalt DCK594P2 includes the DCS570 20V MAX XR 7-1/4-inch brushless circular saw (blade-right). It shares the exact same 7-1/4-inch blade stack sitting in corded framing saws and miter boxes, cuts up to 2-9/16 inches deep at 90 degrees, and clears 2x lumber cleanly at a 45-degree bevel without binding.
Reciprocating Saw Architecture: Full Demolition vs Stud-Bay Compact
The reciprocating saws flip the script completely. Milwaukee 3697-25 packs the full-size Gen 2 2821-20 M18 FUEL SAWZALL with a long 1-1/4-inch stroke length and up to 3,000 SPM, built for tearing out cast iron, window frames, nail-embedded studs, and tree limbs. DeWalt DCK594P2 packs the DCS367 compact XR reciprocating saw (1-1/8-inch stroke, 14.5-inch overall length) with a four-position blade clamp that mounts blades horizontal or vertical for flush cuts between 16-on-center studs. Plumbers and kitchen remodelers often prefer DeWalt's compact DCS367; heavy demolition crews prefer Milwaukee's full-length 2821-20 SAWZALL.
Generation Check on DeWalt's Drill and Impact
One crucial detail inside DCK594P2: DeWalt pairs those strong XR saws with the heavy-duty 3-speed DCD996 hammer drill and DCF887 3-speed impact driver. Both are battle-proven brushless XR workhorses, though they belong to the generation prior to DeWalt's shorter DCD805/DCD999 and DCF850/DCF845 models. Milwaukee's 3697-25, by contrast, includes the current Gen 4 2904-20 and 2953-20 pair.
Look honestly at how residential remodeling and serious DIY projects unfold: you often use an oscillating multi-tool (undercutting door casings, plunge-cutting drywall boxes, scraping grout) and a 5-inch random orbital sander far more hours per month than a heavy masonry hammer drill. Neither 3697-25 nor DCK594P2 includes a multi-tool or sander. That is why DeWalt's DCK700D1P1 7-tool brushless kit earns a dedicated spot in this comparison: you trade heavy hammer-drill percussion for a compact brushless DCD794 drill/driver, DCF809 impact, DCS565 6-1/2-inch XR circular saw, DCS369 one-handed XR recip saw, DCS354 brushless multi-tool, DCW210 XR orbital sander, and DCL040 light, backed by one 5.0Ah and one 2.0Ah battery.
Planning Batteries, Storage, and Holiday Timing
Whichever pro combo kit wins your garage, factor in two follow-up realities:
- High-draw saw batteries: Standard 5.0Ah 18650-cell packs run drills and impact drivers all week, but continuous ripping with a cordless circular saw or SAWZALL wakes up when paired with tabless/pouch high-current packs (Milwaukee M18 REDLITHIUM HIGH OUTPUT / FORGE or DeWalt POWERSTACK / 60V FLEXVOLT; see DeWalt 20V MAX vs 60V FLEXVOLT and our cordless platform buyer's guide).
- Hard rolling storage vs kit bags: Soft contractor bags included with 5-tool and 7-tool kits sag under 35 pounds of steel and lithium packs. Most pros transfer multi-tool kits straight into a wheeled IP65 stack; compare the top three rolling bases in our PACKOUT vs ToughSystem 2.0 vs Klein MODbox showdown.
Shopping around Thanksgiving or December? Multi-tool combo kits are the primary promotion vehicle for Black Friday power tool deals, bare-tool expansion shines during Cyber Monday tool deals, and gift-ready starter bundles are organized by recipient in our Christmas tool gifts 2026 hub. Unsure how much drill you even need? Try our 3-question Drill Finder.
Frequently Asked Questions
Is DeWalt 20V MAX XR more powerful than Milwaukee M18 FUEL because of the 20V label?
No. Both Milwaukee M18 and DeWalt 20V MAX use five 3.6V lithium-ion cell groups wired in series, producing 18 volts nominal under load and 20 volts maximum off the charger without a load. Motor design, electronics, and battery cell discharge current determine real output, not the 18V vs 20V sticker.
Should I buy a 2-tool pro kit plus bare saws, or buy the 5-tool kit upfront?
Buy the 5-tool kit upfront if you like the exact circular saw and reciprocating saw sub-models bundled in 3697-25 or DCK594P2, because per-tool cost inside a 5-tool bundle is lower than piecing together bare tools. Buy the 2-tool kit (3697-22 or DCK2050M2) if you want a specific specialty saw instead, such as Milwaukee's 7-1/4-inch 2732-20 framing saw or DeWalt's 60V FLEXVOLT worm-drive style saw.
What is the difference between Milwaukee 3697-22 and Milwaukee 2997-22?
Model 3697-22 is the newer Gen 4 M18 FUEL two-tool kit containing the 2904-20 hammer drill (with AUTOSTOP) and 2953-20 Tri-LED impact driver. Model 2997-22 is the prior Gen 3 M18 FUEL two-tool kit containing the 2804-20 hammer drill and 2853-20 impact driver. Both include two 5.0Ah XC5.0 batteries and an M18/M12 charger.
Are two 5.0Ah batteries enough for a 5-tool cordless combo kit?
Two 5.0Ah batteries are plenty for solo remodeling where one person switches from cutting to fastening, keeping one pack on the saw and one on the impact driver or charger. For two-person framing or heavy roof/deck ripping, adding one higher-capacity 6.0Ah or 8.0Ah pack eliminates charger downtime.
Does Milwaukee's M18/M12 kit charger actually charge 12V M12 batteries too?
Yes. Both 3697-22 and 3697-25 include Milwaukee's dual-port M18 and M12 multi-voltage charger (48-59-1812), which accepts both 18V slide packs and 12V stem packs sequentially. DeWalt's DCB115 charger similarly supports DeWalt 12V MAX, 20V MAX, and 60V MAX FLEXVOLT slide packs.
Sources